# Management Tool

If you haven't done so, head to the Getting Started page on how to connect to the Management Tool interface.

This guide goes over all the features of the Management Tool.

# Login

If it is your first time logging into the Management Tool the credentials are:

http://syrusrouter

Username: syrus4g
Password: 123456

Login screen

It is recommended to change the password as soon as you login for the first time

⚠️ Note that once the password is changed there's no way to recover it in case you forget it!

# Change password

To change the password head to the menu on the top left corner and click on the Username -> Preferences.

Change password

Enter the current password (ex: 123456) and the new password twice to change it.

# Dashboard

The dashboard gives you an overview of the important features of Syrus. Each card has a VIEW MORE button along the bottom that navigates to the particular menu option on the left hand sidebar.

Dashboard

# System

The System page provides overall information about the Syrus, including the version, storage and CPU information.

You can get an idea of the amount of time your device operates at different CPU frequencies or the amount of space left in your memory. Also, if you have an external SD Card connected you can view the amount of space it has left.

System

# GNSS/GPS

Syrus comes with two GNSS solutions, one from Sierra Wireless: XM1110 and another built into the Quectel EG25-G module.

A tool can be used to control which GNSS source to work with.

Inputs/Outputs

# Inputs/Outputs

The inputs and outputs tab allows you to interact with the device's GPIOs and Analog voltage signal.

The outputs tab will also detect short-circuits and show an alert if the device comes across a short.

Inputs/Outputs

# Power Save Mode

The power save mode section allows you to configure when the unit will go into a low power consumption mode. This is very important in applications that use a battery as an external power source.

The configuration of this section can be summarized as follow:

Power Save Mode

# Mobile

The Mobile tab allows you to view cellular connectivity information. You can use your own connectivity or choose the device's internal embedded SIM.

Enter the APN and view the GSM/GPRS registration in this tab.

Mobile

# Hotspot

Hotspot allows you to share internet with other users. As long as the device has internet via Ethernet, Wifi, or Cellular, you can create a Hotspot and enter a passphrase.

Clients can then connect to the hotspot via Wifi and enter the passphrase.

# Accelerometer

The accelerometer section allows you to calibrate the device's accelerometer to report acceleration related events.

Here you can start an auto-alignment process and adjust the thresholds and sensitivity values for different device signals.

Accelerometer

# ECU

The ECU section allows you to configure the CAN interface built into the device so you can read J1939 parameters from the vehicle's CAN bus.

ECU

# App Manager

The App manager allows you to install applications and run them using Syrus. App Manager

Last Updated: 8/7/2020, 5:48:03 PM